Sachin Chavan

• Client Model review preparation and resolution of model review tags as given by client, vendor drawing review, Coordination with client office for technical queries and project progress.
• Field trips to locate tie-in points and route piping through areas with very dense existing piping systems. Also for the purpose of assisting construction crews in troubleshooting construction and constructability problems, Co-ordination with Clients, Engineering Consultants, Sub-contractors, vendors and other departments.
• Experience in field walk downs, site engineering and construction support doing field sketches and site investigation Experience Took field trips to locate tie-in points and route piping through areas with very dense existing piping systems.. Also for the purpose of assisting construction crews in troubleshooting construction and constructability problems.
• Experience with ASME pressure piping codes B31.1,B31.4 & 31.8
• Hands on experience in various engineering design soft tools like SP3D (Smart plant 3D), PDMS, PDS AutoCAD, Micro station, SPR and Navisworks with Extensive Experience includes numerous projects with all engineering disciplines.
• Overall 16 years of diversified experience in Detail Design work on projects in the petro-chemical, Oil & Gas – (Upstream, Midstream and Downstream) Projects, Refinery projects (i.e. FEED studies, Greenfield & Brownfield ), Bulk-drug project .
• Plot plan review for optimization and safety distances, MTO coordination and checking, Piping study drawing review, Technical reports for proposal projects, Involvement in preparation of project and company standards
• Preparing Bills Of Material.
• Preparation of piping layouts GADs, Planning and execution of isometric issue as per schedule, Site queries resolution, Manpower planning and scheduling, Interdisciplinary coordination for project progress
• Assuming all of checker responsibility & assigned the duty.
• Prepare project schedule and Design & Supporting of critical piping such as Air Fin Coolers, Column , Re-Boiler, oil Storage Tanks (API-650), fire water, fresh water, Flare Headers, Pressure Relief Systems, Filters, Heat Exchangers,
• 3D modeling using consideration of constructability/operability/maintainability, point of view.
• Visiting Construction Site.
• Review & comment on vendor Documents.
• Review all internal design check (IDC) documents from all disciplines, Coordination work with Civil & Structural, Mechanical, Instrumentation and Electrical interfacing with regard to layout and piping design.
• Review of ITB documents for proposal projects execution.
• With Major activity in Design layouts & construction support - Plot Plan, Equipment layouts, Piping layouts, Material take-off, 3D modeling of piping systems. Prepare deliverables like GA checking & Isometric drawings, Bill of Material, verification of design and supervision of piping personnel. Experience in the field of walk downs, site engineering and construction support doing field sketches and site investigation Experience.
• Worked as an Area Engineer on one of the biggest oil & gas processing projects.

• Oil storage area , fire water area & fresh water area, - piping layout design & modeling
• Fire water ring & Sprinkler Nozzle modeling as per HSSE tank layout.
• Deck-well height is 2.1 meter. Form polar model as per HSSE drawing.
• Critical line Pipe support updated as per stress mark up.
• Self check & Extraction of Isometrics. Nozzle orientation for gas boot & oil storage tank.
• Booster, on-spec, off-spec & water Drain pump updated as per vender date
• Final valve MTO takeoff .
• utility station & safety shower location modeling as per plot plan.
• Data consistency check in PDMS & Extraction of Isometrics.
• Update client comments and piping deliverables issued for construction.
• Prepare civil input (IDIT) Issue engineering drawings and layouts for Inter-Discipline Checks (IDC) coordinate with other engineering discipline in the integration of technical data inputs. Identify technical conflicts in layout design; coordinate with other engineering disciplines
• 30%, 60% and 90% at Model review comment updated in PDMS
• Equipment Layout checking as per OISD-118 (Oil Industry Safety Directorate).
• Review & comment on vendor Documents.
• Coordinating with other Disciplines for Clash free model
• Gas lift Compressors piping & equipment layout Design as per project specification & modeling.
• Parameter consider for GL compressors. Suction Pressure : 310 psig & discharge pressure 1965 psig
• Gas lift compressors will be installed in center island (PAR. PAU & PAM ) to boost the MP gas pressure up to lift gas pressure level. The compressors will be able to provide the total lift gas requirement for central .these compressors will also supply fuel gas to gas turbines for power generation .
• Suction KO Drum, interstage KO Drum & Wet KO Drum , Compressor , & exchanger modeling as per vendor data .piping & support updated as per stress mark up. ISO Extraction & Self checking
• Stress critical line updated.
• Assisting Piping layout development in SP3D
• Nozzle orientation & platform arrangement for KOD.
• First cut MTO takeoff for IFR P& ID.
• Client Model review preparation and resolution of model review tags as given by client
• Review & comment on vendor Documents as per layout requirement. ensure the correctness of module design and for better understanding of client’s requirement