Rapid Coat Division

We manufacture REACH and ROHS compliance Epoxy Polyester Powders for electrostatic powder coating on metal article. We manufacture all the three chemistries like Epoxy Polyester (EP) or Hybrid, Pure Polyester (PP) and Pure Epoxy range of powders. These three chemistries find its immense application in both indoor as well as outdoor application.

These are general purpose coatings where a limited amount of exposure to sunlight is experienced. They have all round generally good properties. The coating has slight orange peel. Most glossy finishes are based on this.

Epoxy-polyester powder coatings are based on a combination of polyester and epoxy resins. This chemistry of powder coating finds its target market in a wide range as a vast range of special effects are possible, hence this chemistry finds wide range of applications. Hybrids perform well in non-weather able applications.

Rapid XCEL 1630 (LDPE)
Rapid XCEL 1630 is a polyethylene based free-flowing powder. The key characteristics of this powder are low melting temperature, and excellent high-gloss coatings.

Low melting temperatures helps to increase line speeds and lower energy costs. These powders are generally preferred where both aesthetic as well as functional properties are desired. In addition to this, the resulting coating provides excellent edge coverage and corrosion protection.

Rapid Roto 3604
Rapid Roto 3604 is a linear medium density polyethylene specifically designed for rotational applications. Rapid Roto 3604 has good flow, toughness, impact resistance and environmental stress crack resistance (ESCR).

All powders are manufactured from prime virgin grades of polymers manufactured by the major polymer producers. All the grades mentioned have been manufactured from polymers that meet the requirements to Indian Standard IS:1046-1982 on "Polyethylene for its safe use in contact with foodstuffs, pharmaceuticals, and drinking water"